µÛÍõ»áËù

This face reduces the chipping of cutting edges in heavy punching applications. The center point is removed for height clearance between the punch and the material.

This face includes a center point for alignment and a flat face to reduce distortion when punching repetitive holes in a narrow flat bar such as fence or railing.

This face is used when punching thin material to reduce deformation of punched material caused by a center point. This punch is also used when the slug is being retained.

This face is used mainly on thicker material to reduce tonnage. 

This face is also used on thicker material to reduce tonnage but has a center point for alignment.

This face is used for thin material to reduce tonnage and distortion. Must be used on material 16 gauge thick or lighter. 

This face reduces tonnage and distortion on material 1/4" thick and less. This punch will break if used 
on thicker material.